SDTR1103CAP SMD Drop Resistant Transponder Coil - 0.720mH

229 Items

5,00 €

Freq. (kHz) 125
Tolerance ± 5%
Cres (pF) 220
Height (mm) 2.7
Length (mm) 11.9
Width (mm) 3.9
DCR (Ω) Max 82
L (mH) 7.20
Q Min 39.5
SRF (kHz) Min 300
Sensitivity (mVpp/App/m) Min 70


 All dimensions in mm.


Recommended reflow profile.

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).



The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used. 

  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance RmaxMeasured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.


Related Products