3DV11AOI 3DV11AOI - 3D receiver sensor for VR magnetic tracking system 13x11.6x3.45 mm 

New
3DV11AOI - 3D receiver sensor for VR magnetic tracking system 13x11.6x3.45 mm

Low profile 3D magnetic receiver sensor for VR magnetic tracking systems.

• Best size/sensitivity ratio
• SMD solution
• Suitable for AOI
• Best isotropic/size performance
• Inductance range: 2-10mH
• Dimensions: 13 × 11.6 × 3.5 mm
• Sensitivity (mV/A/m): 11

  • Typical Operating Frequency 20kHz
  • Storage Temperature -40 ºC → +85 ºC
  • Operating Temperature -40 ºC → +85 ºC
  • Lead Free Reflow Profile: 
  • Equivalent to test condition K from MILSTD-202G, method 210F
  • Component temperature 250±5 ºC. Time 30 ± 5 s. Temperature ramp/inmersion and emersion rate: 1ºC/s-4ºC/s. Time above 183ºC: 90-120 s.

A wide range of configuration possibilities

PREMO biggest competitive advantage is the short time-to-market performance when developing a custom-made solution according to customer specifics.

A wide variety of EM sensors can be designed to meet AR/VR systems requirements. From cube configurations to low-profile configurations, and from lower to higher sensitivities, the range of possibilities is very wide:

• Shapes (i.e. rectangular, quasi-cub, ultralow-profile)
• Inductance: Tx (20μH – 2mH), Rx(300μH – 7mH)
• Operation frequency (3 – 300kHz)
• Standard cables to male/female connector
• FPC connection
• Over-Molded (low pressure molding)