TP0702UCAP TP0702UCAP SMD Transponder Coil 8.6x3x2.7 mm MAX 

TP0702UCAP SMD Transponder Coil 8.6x3x2.7 mm MAX
This TP0702UCAP Series of Surface Mountable ferrite wound inductor is a stronger solution in very small dimensions performing very good electrical properties, a very good solution for RTPMS , Keyless Go and Keyless entry systems:

 

  • Size: 8,7 x 2.9 x 3 mm.
  • Very good mechanical performance.
  • High sensitivity in the smallest volume.
  • Very stable electrical properties in full operational temperature range (-40, +150 ºC).
  • Good performance in thermal shock.
  • Big metallised pad area Pb free.
  • Good cost/performance ratio.
 

Applications:

Due to its small dimensions, it’s a suitable design for other applications working at lower frequencies.
 
  • Terminals: Ag-Ni-Sn100.
  • Wire: H, 180ºC, Solderable.
  • Max. Operating Temperature 125ºC.

 

The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales deparment for any inquiry.
 

This product has a datasheet available upon request. 

L (mH)ToleranceQ MinFrequency (kHz)Cres (pF)SRF (kHz) MinDCR (Ω) MaxSensitivity (mVpp/App/m) MinLength (mm)Width (mm)Height (mm)
TP0702UCAP-0238J 2.38 ± 5% 30 125 680 900 25.3 25 8.6 3 2.7
TP0702UCAP-0491J 4.91 ± 5% 35 125 330 700 38.5 38 8.6 3 2.7
TP0702UCAP-0720J 7.2 ± 5% 30 125 220 500 61.1 50 8.6 3 2.7
TP0702UCAP-0900J 9.0 ± 5% 30 125 180 450 84.7 55 8.6 3 2.7
TP0702UCAP-1850J 18.5 ± 5% 30 125 87 400 165 90 8.6 3 2.7

 

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 22.4 16.4 16 8 4 2 2.9 0.3 2500

 

All dimensions in mm.

 

 

 

3D 2D
TP0702UCAP

If you need a detailed version please fill out the form.

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time). 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

  • Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  • Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  • Self-resonance frequency fmin:  Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  • DC resistance Rmax: Measured at 20ºC ambient temperature, measuring current <IR.
  • Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification. 

Buy Online

Shortscription
In Stock
5,00 €
5,00 €
5,00 €
5,00 €
5,00 €
Showing 1 - 5 of 5 items