TP0602 TP0602 Micro SMD Hard Ferrite Transponder Inductor (2.38mH - 9mH) 

TP0602 Micro SMD Hard Ferrite Transponder Inductor (2.38mH - 9mH)

The TP0602 Series of Surface Mountable ferrite wound inductor is a small transponder solution for automotive applications like TPMS,Keyless Go and Keyless entry systems:

 

  • Size: 6.6mm x 2.3mm x 1.75mm.
  • Good mechanical perfomace.
  • High sensitivity for 20KHz, 40KHz and 125KHz applications.
  • Good perfomance in thermal shock test.
  • Good cost/perfomance ratio.
  • Available high inductance version for hearing aids applications.

 

Applications:  

Good solution for TPMS moulded solutions. The TP0602 is the smaller SMD transponder coil available in the market.

 

  • Terminals: Ag-Ni-Sn100.
  • Wire: H, 180ºC, Solderable.
  • Max. Operating Temperature 130ºC.

 

The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz and 20 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales deparment for any inquiry.

 

This product has a datasheet available upon request.

L (mH)ToleranceQ MinFrequency (kHz)Cres (pF)SRF (kHz) MinDCR (Ω) MaxSensitivity (mVpp/App/m) MinLength (mm)Width (mm)Height (mm)
TP0602-0238J 2.38 ±5% 20.7 135 680 900 49 16 6.6 2.3 1.75
TP0602-0491J 4.91 ±5% 20.7 125 330 600 95 25 6.6 2.3 1.75
TP0602-0720J 7.20 ±5% 30 125 220 500 168 30 6.6 2.3 1.75
TP0602-0900J 9.00 ±5% 18 125 180 450 190 35 6.6 2.3 1.75

 

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 30.4 24.4 24 4 4 2 2.5 0.3 5000

 

All dimensions in mm.

 

3D 2D
TP0602

TP0602 Pad layout

Recommended reflow profile. 

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).

 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance Rmax: Measured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.

Buy Online

5,00 €
Out of stock
5,00 €
5,00 €
5,00 €
Showing 1 - 4 of 4 items