3DTX10 3D Coil Cube Rx sensor for VR/AR magnetic tracking system 17.4x15.2x13.9 mm

L (mH) MinDCR (Ω) MaxFreq. (kHz)Cres (pF)Q x,y,z MinHeight (mm)Width (mm)Length (mm)SRF (kHz) MinSensitivity (mV/uT) min
Showing 1 - 1 of 1 item

Coil Cube Rx sensor for VR magnetic tracking system.


Three axis magnetic antenna for magnetic tracking sensor systems. Very good performance/size ratio, with isotropic response. Used as emitter in VR/AR applications (gaming, etc.) and motion capture applications. Very low latency compared with other motion tracking technologies.


High axis symmetry (X,Y,Z), repeatability (very good isotropy) and accuracy (up to 5%
Magnetic Sensitivity: 3.8 mVpp / App / m @20kHz.
Mechanical Drop & Vibration compliant.
Mounting method: SMT (Taped & Reeled).
-20ºC to 85ºC Temperature Performance.
Multiple frequencies available (typ 60kHz, 125kHz, 134kHz).
According industry and safety standards: UL94-V0.


Lx,y,z nom (µH)

Qx,y,z nom Frequency (kHz)SRFx,y,z (kHz) MinDCRx (Ω) MaxDCRy (Ω) MaxDCRz (Ω) MaxSensitivity (mVpp/App/m) Min
3DTX10-A-0100J   140/140/104  2.6/2.6/2.0 20 1 6.7 6.9 6.5 3.5

This chart is a reference guide for the most common required values at working frequency of 20kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales department for any inquiry. Sensitivity measured with Helmholtz coils H=11.37
App/m @20kHz. Contact us for measurement specification.
SRF: Self-resonant frequency of the coil.


3DTX10 dimensions


3DTX10 pad layout


3DTX10 electrical diagram