KGEA-DHSL Door Handle LF Tx antenna for Keyless Entry System (SWITCH and LED)(0.285mH)

Product
Door Handle LF Tx antenna for Keyless Entry System (SWITCH and LED) - 285uH - KGEA-DHSL-C-0285J
DHSL Door Handle LF Tx antenna for Keyless...
10,00 €
Out of stock
Freq. (kHz)L (µH)Length (mm)Width (mm)Height (mm)SRF (MHz) MinQ MinCres (nF)
114.528514015.612.61356.8
Showing 1 - 1 of 1 item
Characteristics

DHSL Door Handle LF Tx antenna for Keyless Entry System (SWITCH and LED).

PREMO is developing customized door handle antennas using a type of technology over-molding low pressure depending on themechanical requirements and waterproof IP degree required by the customer.

For Door Handle Antennas, we also have the ability to integrate in a unique connector (6ways), the Antenna LF + Switch + LED as a single whole.


Characteristics

  • Overmolded Antenna with Low Pressure Technology (LPM)
  • LPM is a well know technology PREMP
  • Very fast to produce (No Curing needed)
  • Low Profile. Height max= 7,2 mm.
  • IP56 grade Waterproof.
  • Connector located outside assembly Antenna LF, Switch and LED.
  • High stability in temperature (-40ºC up to +85ºC).
  • Resonant frequency adjusting below +/- 2kHz.
  • Custom L-C value @ F-Res
  • This antenna is designed based on AECQ-200 

Nomenclature description


L+C in series:

KGEA-DHSL nomenclature

     

Operating Frequency @114,5Khz @25ºC @1Vac. (L+C in series)

L (mH)Cres (nF)Q(L+C)Rac (Ω)ArmsFreq. (kHz)Height (mm)Length (mm)Width (mm)
KGEA-DHSL-C-0285J 0.285 6.8

>135

<2 1A 114.5 12.6 140 15.6

Antenna is measured in resonant mode.

Dimensions

KGEA-DHSL dimensions

ELECTRICAL DIAGRAM

KGEA-DHSL electrical diagram

Others

KGEA-DHSL parts

H-Field

H-Field Magnetic Strength KGEA-DHSL series

Setup

 

Measuring conditions example

 

Results

  • Strength Magnetic field probe measures in load Ipp=2App to 3meters @fo=125khz
  • Receiving the signal from the probe field with the spectrum analyzer.. 
  • 105 dBμV/m ± 2dB@3 meters (I=2App; V=5Vpp) in maximum direction. .