3DV15-A-S0600J
3D EM receiver sensor for VR magnetic...
7,00 €
743 In Stock
Product successfully added to your shopping cart
Quantity
Total
3DV15 - 3D EM receiver sensor for VR/AR magnetic tracking systems 15.6x15.6x3.8mm
- picture_as_pdfDownload Data Sheet
- Characteristics
- Dimensions
- Packaging
- Pad Layout
- Electrical Diagram
- Measurement Conditions
- Custom Product
Product
| L (mH) Min | DCR (Ω) Max | Freq. (kHz) | Cres (pF) | Q x,y,z Min | Height (mm) | Width (mm) | Length (mm) | SRF (kHz) Min | Sensitivity (mV/uT) min |
|---|---|---|---|---|---|---|---|---|---|
| 20 | 3.8 | 15.6 | 15.6 | ||||||
| 20 | 3.8 | 15.6 | 15.6 | ||||||
| 20 | 3.8 | 15.6 | 15.6 | ||||||
| 20 | 3.8 | 15.6 | 15.6 |
Showing 1 - 4 of 4 items
Downloads
Characteristics
3D EM receiver sensor for VR magnetic tracking systems.
• Low profile
• SMD solution
• Highly customizable solution
• Good mechanical/drop test perfomance
• Inductance range: 2-50mH
• Best size/sensitivity ratio. Sensitivity over 45 mV/A/m @20 kHz
This product has a datasheet available upon request.
| Lx,y,z nom | Qx,y,z nom | f (kHz) | SRF x,y (kHz) Min | SRF z (kHz) Min | DCR x (Ω) Max | DCR y (Ω) Max | DCR z (Ω) Max | Sensitivity x,y,z DCR z (Ω) Max(mVpp/App/m) Min | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 3DV15-A-S0600J | 6.0/ 6.0/ 7.1 | 5.5/5.5/5.4 | 20 | 225 | 550 | 143 | 143 | 220 | 15 | |
| 3DV15-A-S0900J | 9.0 / 9.0 / 10.6 | 6.0/6.0/4.5 | 20 | 190 | 300 | 176 | 176 | 275 | 19 | |
| 3DV15-A-S2000J |
20 / 20 / 20 |
8.0/8.0/5.5 | 20 | 120 | 250 | 330 | 330 | 500 | 30 | |
| 3DV15-A-5350J |
53.5 / 53.5/ 34 |
7.5/7.5/5.2 | 20 | 120 | 150 | 925 | 950 | 875 | 43 (x,y) / 33 (z) |
Dimensions
All Dimensions in mm. Pins Coplanarity 0.10mm. General Tolerances unless indicated ±0.1mm
Contact PREMO for more detailed information about pad layout.
Packaging
PAD LAYOUT
All Dimensions in mm. Pins Coplanarity 0.10mm. General Tolerances unless indicated ±0.1mm
Contact PREMO for more detailed information about pad layout.
ELECTRICAL DIAGRAM
MEASUREMENT CONDITIONS
- Typical Operating Frequency 20kHz
- Storage Temperature -40 ºC → +85 ºC
- Operating Temperature -40 ºC → +85 ºC
- Lead Free Reflow Profile:
- Equivalent to test condition K from MILSTD-202G, method 210F
- Component temperature 250±5 ºC. Time 30 ± 5 s. Temperature ramp/inmersion and emersion rate: 1ºC/s-4ºC/s. Time above 183 ºC: 90-120 s.
Custom Product
A wide range of configuration possibilities
PREMO biggest competitive advantage is the short time-to-market performance when developing a custom-made solution according to customer specifics.
A wide variety of EM sensors can be designed to meet AR/VR systems requirements. From cube configurations to low-profile configurations, and from lower to higher sensitivities, the range of possibilities is very wide:
• Shapes (i.e. rectangular, quasi-cub, ultralow-profile)
• Inductance: Tx (20μH – 2mH), Rx(300μH – 7mH)
• Operation frequency (3 – 300kHz)
• Standard cables to male/female connector
• FPC connection
• Over-Molded (low pressure molding)