KGEA-AF-B-0104J
Long Range Flexible LF Emitter Antenna for...
25,00 €
Out of stock
Product successfully added to your shopping cart
Quantity
Total
KGEA-AF and KGEA-AFC Long Range Flexible LF Emitter Antenna for Automotive (0.104mH-0.240mH)
Product
| Freq. (kHz) | L (µH) | Length (mm) | Width (mm) | Height (mm) | SRF (MHz) Min | Q Min | Cres (nF) |
|---|---|---|---|---|---|---|---|
| 125 | 104 | 350.50 | 12 | 32 | 1 | 100 | 15.6 |
| 125 | 161 | 350.50 | 12 | 32 | 1 | 330 | 330 |
| 125 | 240 | 350.50 | 12 | 32 | 1 | 100 | 6.8 |
Showing 1 - 3 of 3 items
Downloads
Characteristics
Long Range Flexible LF Emitter Antenna for Automotive.
- Length from 300mm until 500mm
- Higher impact absorption and mechanical reduction preventive.
- IP protection 68 (maximum degree against dust and water.
- High stability in temperature (-40ºC up to +85ºC).
- High accuracy inductance and/or resonance frequency
- Custom L-C value (F-Res: KGEA-AFC) under demand or only L (KGEA-AF)
- Significant saving in final PKE application: harness, connectors and power switching devices reduced by 4 or 5.
- Saving in power consumption
Characteristics:
- The main technical and economic advantages:
- Longer antenna (length from 300mm until 500mm).
- Completely flexible antenna.
- Deformation in the middle of the antenna.
- Higher impact absorption and mechanical reduction preventive.
- IP protection 67.
- High stability in temperature (-40ºC up to +85ºC).
- -Resonant frequency adjusting below +/- 2kHz.
- -Custom L-C value (F-Res: KGEA-AF) under demand or only L (KGEA-AFC)
- -Wiring and connectors is reduced by 1/3, ¼ or 1/5 respectively.
- -OEM assembly time is reduced by 1/3, ¼ or 1/5 respectively.
- -Total energy consumption and battery current leaking, a very important parameter specially in electric vehicles is reduced proportionally.
- -A longer antenna need lower currents to generate equal or more intense magnetic fields thus reducing the again the nergy needed and the cross section of the wire to the antennas.
The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz, 20 kHz and 134.2 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales department for any inquiry.
| Operating Frequency @125Khz. (Only L) | L (mH) | Cres (nF) | Q Min | SRF (MHz) Min | Freq. (kHz) | Length (mm) | Height (mm) | Width (mm) |
|---|---|---|---|---|---|---|---|---|
| KGEA-AF-B-0104J | 0.104 | - | >100 | >1 | 125 | 350.50 | 32 | 12 |
| Operating Frequency @125Khz. (Only L) | L (mH) | Cres (nF) | Q Min | SRF (MHz) Min | Freq. (kHz) | Length (mm) | Height (mm) | Width (mm) |
|---|---|---|---|---|---|---|---|---|
| KGEA-AF-A-0161J | 0.161 | 330 | 330 | >1 | 125 | 350.50 | 32 | 12 |
| Operating Frequency @125Khz. (L+C in series) | L (mH) | Cres (nF) | Q Min | SRF (MHz) Min | Freq. (kHz) | Length (mm) | Height (mm) | Width (mm) |
|---|---|---|---|---|---|---|---|---|
| KGEA-AFC-B-0240J | 0.240 | 6.8 | >100 | >1 | 125 | 350.50 | 32 | 12 |
Dimensions
ELECTRICAL DIAGRAM
H-Field
H-Field Magnetic Strength KGEA-AF and KGEA-AFC series
Setup
Measuring conditions example
Results
Hardness
