KGEA-HBT KGEA-HBT Short Range Antenna LF for smart entry system. External housing + LPM (filled) 

New
KGEA-HBT Short Range Antenna LF for smart entry system. External housing + LPM (filled)

Short Range Antenna LF for smart entry system. External housing + LPM (filled).

PREMO offers a short antenna with a high mechanical robustness and the best performance electrical on metal surface due to its bridge type design external housing.

Characteristics:

• Short antenna (length until 150 mm).
• External housing shape H-bridge Material PBT-GF30% or PA66-GF30%.
• Strong anchor points which provide an easy assembly and will ensure mechanical robustness.
• Higher impact absorption and mechanical reduction preventive.
• LF antenna module inside external housing is to cover by Low Pressure Technology (LPM)
• LPM is a well know technology in PREMO.
• Very fast to produce (No Curing needed)
• IP56 grade Waterproof
• Connector Non Waterproof IP52 located outside assembly housing plastic base.
• High stability in temperature (-40ºC up to +85ºC).
• Resonant frequency adjusting below +/- 2kHz.
• Custom L-C value (F-Resonant)
• This antenna is designed based on AECQ-200

       

Nomenclature description and Schematic Diagram

L+C in series:

KGEA-HBT nomenclature

Field Magnetic Strength

Procedure/Setup

  • Antenna PREMO mounted on Reader and signal amplifier ( I=2App, V=5Vpp).
  • Probe FMZB 1538143 (as receiver) used to measure the magnetic field (dBµV/m).


Result

  • 105 dBµV/m ± 2dB@3 meters (I=2App; V=5Vpp) in maximum direction 

Electrical parameters


Operating Frequency @134,5Khz @25ºC @1Vac. (L+C in series) 

L (mH)Cres (nF)Q(L+C)Rac (Ω)Arms
KGEA-HBT-C-0205J 0.205 6.8

>135

<1.5 1A

Antenna is measured in resonant mode

KGEA-HBT dimensions

KGEA-HBT parts

No stock available at this moment. Please request this product via contact form or write us at info@grupopremo.com