3DV15 - 3D EM receiver sensor for VR/AR magnetic tracking systems 15.6x15.6x3.8mm

L (mH) MinDCR (Ω) MaxFreq. (kHz)Cres (pF)Q x,y,z MinHeight (mm)Width (mm)Length (mm)SRF (kHz) MinSensitivity (mV/uT) min
203.815.615.6
203.815.615.6
203.815.615.6
203.815.615.6
Showing 1 - 4 of 4 items
Characteristics

3D EM receiver sensor for VR magnetic tracking systems.

• Low profile
• SMD solution
• Highly customizable solution
• Good mechanical/drop test perfomance
• Inductance range: 2-50mH
• Best size/sensitivity ratio. Sensitivity over 45 mV/A/m @20 kHz

This product has a datasheet available upon request.

Lx,y,z nomQx,y,z nom f (kHz)SRF x,y (kHz) MinSRF z (kHz) MinDCR x (Ω) MaxDCR y (Ω) MaxDCR z (Ω) MaxSensitivity x,y,z DCR z (Ω) Max(mVpp/App/m) Min
3DV15-A-S0600J 6.0/ 6.0/ 7.1  5.5/5.5/5.4 20 225 550 143 143 220 15
3DV15-A-S0900J 9.0 / 9.0 / 10.6  6.0/6.0/4.5 20 190 300 176 176 275 19
3DV15-A-S2000J

20 / 20 / 20 

8.0/8.0/5.5 20 120 250 330 330 500 30
3DV15-A-5350J

53.5 / 53.5/ 34

7.5/7.5/5.2 20 120 150 925 950 875 43 (x,y) / 33 (z)
Dimensions

All Dimensions in mm. Pins Coplanarity 0.10mm. General Tolerances unless indicated ±0.1mm
Contact PREMO for more detailed information about pad layout.

Packaging

PAD LAYOUT

All Dimensions in mm. Pins Coplanarity 0.10mm. General Tolerances unless indicated ±0.1mm
Contact PREMO for more detailed information about pad layout.

ELECTRICAL DIAGRAM

MEASUREMENT CONDITIONS

  • Typical Operating Frequency 20kHz
  • Storage Temperature -40 ºC → +85 ºC
  • Operating Temperature -40 ºC → +85 ºC
  • Lead Free Reflow Profile: 
  • Equivalent to test condition K from MILSTD-202G, method 210F
  • Component temperature 250±5 ºC. Time 30 ± 5 s. Temperature ramp/inmersion and emersion rate: 1ºC/s-4ºC/s. Time above 183 ºC: 90-120 s.
Custom Product

A wide range of configuration possibilities

PREMO biggest competitive advantage is the short time-to-market performance when developing a custom-made solution according to customer specifics.

A wide variety of EM sensors can be designed to meet AR/VR systems requirements. From cube configurations to low-profile configurations, and from lower to higher sensitivities, the range of possibilities is very wide:

• Shapes (i.e. rectangular, quasi-cub, ultralow-profile)
• Inductance: Tx (20μH – 2mH), Rx(300μH – 7mH)
• Operation frequency (3 – 300kHz)
• Standard cables to male/female connector
• FPC connection
• Over-Molded (low pressure molding)