KGEA-AF and KGEA-AFC Long Range Flexible LF Emitter Antenna for Automotive (0.104mH-0.240mH)

Product
Freq. (kHz)L (µH)Length (mm)Width (mm)Height (mm)SRF (MHz) MinQ MinCres (nF)
125104350.501232110015.6
125161350.5012321330330
125240350.50123211006.8
Showing 1 - 3 of 3 items
Characteristics

Long Range Flexible LF Emitter Antenna for Automotive.

  • Length from 300mm until 500mm
  • Higher impact absorption and mechanical reduction preventive.
  • IP protection 68 (maximum degree against dust and water.
  • High stability in temperature (-40ºC up to +85ºC).
  • High accuracy inductance and/or resonance frequency
  • Custom L-C value (F-Res: KGEA-AFC) under demand or only L (KGEA-AF)
  • Significant saving in final PKE application: harness, connectors and power switching devices reduced by 4 or 5.
  • Saving in power consumption
 

Characteristics:

 
  • The main technical and economic advantages:
  • Longer antenna (length from 300mm until 500mm).
  • Completely flexible antenna.
  • Deformation in the middle of the antenna.
  • Higher impact absorption and mechanical reduction preventive.
  • IP protection 67.
  • High stability in temperature (-40ºC up to +85ºC).
  • -Resonant frequency adjusting below +/- 2kHz.
  • -Custom L-C value (F-Res: KGEA-AF) under demand or only L (KGEA-AFC)
  • -Wiring and connectors is reduced by 1/3, ¼ or 1/5 respectively.
  • -OEM assembly time is reduced by 1/3, ¼ or 1/5 respectively.
  • -Total energy consumption and battery current leaking, a very important parameter specially in electric vehicles is reduced proportionally.
  • -A longer antenna need lower currents to generate equal or more intense magnetic fields thus reducing the again the nergy needed and the cross section of the wire to the antennas.

 

The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz, 20 kHz and 134.2 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales department for any inquiry.

                             

Operating Frequency @125Khz. (Only L)L (mH)Cres (nF)Q MinSRF (MHz) MinFreq. (kHz)Length (mm)Height (mm)Width (mm)
KGEA-AF-B-0104J 0.104 - >100 >1 125 350.50 32 12

Operating Frequency @125Khz. (Only L)L (mH)Cres (nF)Q MinSRF (MHz) MinFreq. (kHz)Length (mm)Height (mm)Width (mm)
KGEA-AF-A-0161J 0.161 330 330 >1 125 350.50 32 12

Operating Frequency @125Khz. (L+C in series)L (mH)Cres (nF)Q MinSRF (MHz) MinFreq. (kHz)Length (mm)Height (mm)Width (mm)
KGEA-AFC-B-0240J 0.240 6.8 >100 >1 125 350.50 32 12

Dimensions

ELECTRICAL DIAGRAM

H-Field

H-Field Magnetic Strength KGEA-AF and KGEA-AFC series

Setup

 

Measuring conditions example

 

Results

Hardness

conector