Event - News

Premo will showcase the latest Power Electronics Innovations next PCIM Europe

Premo at PCIM 2023

From 9th to 11th, Premo will attend at PCIM Europe, placed in Nuremberg, Germany to showcase the latest innovations in the field of power electronics.

Premo at PCIM Europe 2023

During 9-11.05 (Nuremberg-Germany), Premo is delighted to attend at PCIM Europe in Hall 6, Stand 232! This international exhibition and conference for power electronics, intelligent motion, renewable energy, and energy management is the best platform for researchers, developers, engineers, and manufacturers to exchange ideas, showcase new products and technologies, and discuss the latest trends and challenges in the industry.

As a regular participant at PCIM Europe over the years, Premo recognizes it as the best platform to showcase our latest power electronics innovations and expose the cutting-edge technologies we are currently developing for the E-Mobility industry.

Discover Premo's Cutting-Edge Power Electronics Products to be presented at PCIM Europe

Magnetics for On-board Chargers

Power Transformers for e-mobility

Our power transformers for e-mobility feature a wide range of high-quality magnetics that are specifically designed for onboard battery chargers and DC/DC converters, incorporating high-performance materials to ensure maximum efficiency, temperature stability, and reinforced insulation.

Power Transformers for e-mobility

Power chokes for e-mobility

In terms of power chokes specially designed for e-mobility, Premo will showcase a range of solutions, including EMI AC & output DC filters with CM & DM Chokes, PFC chokes, transformers and associated resonant chokes, and high current output DC filtering chokes, all featuring specialized components such as iron powder, high permeability ferrite, nanocrystalline cores, low-loss high-temperature stability ferrite cores, insulated Litz wire, and edgewise flat winding.

Power chokes for e-mobility

Signal Transformer for e-mobility

We will show our latest innovations for signal transformer solutions such as Flyback auxiliary transformers (multi-outputs coupling and isolation management), Gate-drive transformers for transistors control (special techniques to ensure creepage distance requirements). PLC transformers for communication between the charger and the charging point or the smart grid. Current measurement transformers for feedback and protection (high primary current up to 35A, high isolation management).

Magnetics for Off-Board Chargers

Advanced magnetics solutions for Off-Board Chargers, with reliable and efficient power transfer for a variety of electric vehicle applications. Showcasing:

  • A Power inductive set of 31.5kVA, which includes an isolated 780V/500V transformer and a 65uH resonant choke. An ideal solution for high-power charging applications, ensuring maximum efficiency and safety.
  • For three-phase charging stations, we’ll display the PREMO 3-phase PFC Choke Module with 200uH/43Arms, which provides efficient power transfer.
  • A 12kW 2:1 CLLC Bidirectional Transformer with natural cooling, which is ideal for power applications requiring high power density and a compact form factor.
  • Finally, the total 50 kW SET with 620uH inductance enclosed in a whole aluminum housing and filled with thermal compound. This solution provides excellent thermal management, ensuring optimal performance and reliability.
Magnetics for Off-Board Chargers

Wireless Power Transfer for e-mobility

Innovative wireless charging antenna (compact secondary coils).  A flexible pad for wireless power transfer with a high-performance to match perfectly with the Electrical Vehicle market.

  • Requires no physical contact between the vehicle and the charging station, overcoming the inconvenience and hazards caused by traditional direct-conductive methods.
  • Each pad with multiple built-in high-performance components
wireless power transfer for embolity

DEMOS:

EV Wireless Charging DEMO

In collab with our partner Wifi Power Transfer, we will show an EV Wireless Charging demo with our innovative Receiving and Transfer Antennas working live!

3DPower DEMO

We’ll let you experience how PREMOs 3DPower Technology can unite LLC Transformator and Choke in one Part, using only one core with orthogonal windings, which leads to high power density and reduced weight, all powered and controlled by the reliable Testing Equipment of MSPM.  Between the power source and the transformer, different parameters e.g. current are measured and displayed using the Transformer Test System CS-35A Kit, developed in collaboration with MSPM.

HEAT DISSIPATION TECHNOLOGY – COOLGAP

CoolGap technology takes advantage of the optimized cooling circuit of the car by moving its coolant to the point of maximum loss generation of the magnetic component: the core gap.

This solution is helping PREMO to increase the heat transfer rate of our magnetics, optimize the component thermal management, and help reduce the use of potting compounds and aluminum housings, being a great cost-saving solution.

In collab with Coolgap Partner, we will show how this heat dissipation technology works in real conditions.

Premo Location at PCIM Europe

Hall 6, Stand 232

Get your tickets for next PCIM Europe with special discounts:

If you want to get your PCIM ticket to enter the fair all exhibition days, please request your EXCLUSIVE Codehere.

MEET OUR EXPERTS

Our sales and technical team is happy to meet you at PCIM 2023. Ask for a meeting with them at marketing@grupopremo.com

PREMO HUB

you might also be interested in......

50kW off board transformer
50KW Off Board Charger Transformer with Embedded LLC Resonant Choke

At the heart of Premo’s innovation lies a compact 50KW Off Board Charger Transformer with LLC Resonant Choke set meticulously engineered to meet the demanding power requirements of modern EVs. Housed within a sleek 300 x 174 x 100 mm aluminum casing, this high-performance transformer boasts remarkable efficiency, delivering power with over …  

Read the post

27 June, 2023
5GVEC: un proyecto para impulsar el desarrollo de soluciones 5G para la conducción conectada en España

● El proyecto 5GVEC, liderado por la multinacional DEKRA, cuenta con la colaboración de Ericsson, Tinámica, Tupl, Softcrits, Premo y Top Digital y el apoyo de Innova IRV ● El desarrollo del proyecto supondrá una inversión de más de 4,6 millones de euros. La Fundación Instituto Ricardo Valle de Innovación (Innova IRV) …  

Read the post

01 June, 2023
PREMO release cutting-edge inductive couplers for Electric Vehicle Sniffing / CCS listener applications, revolutionizing high-voltage system monitoring. New MICU 300A-S/LF Series.

PREMO, a leading manufacturer of inductive components, has unveiled its latest breakthrough product – the MICU 300A-S/LF series of inductive couplers, designed specifically for electric vehicle sniffing applications. With the rise of electric vehicles on our roads, there is a growing need for reliable and accurate sniffing solutions to monitor the performance …  

Read the post

12 April, 2023

This website uses cookies

We are using cookies to give you the best experience on our site. Cookies are files stored in your browser and are used by most websites to help personalize your web experience.

You can read our Cookies Policy

Accept Settings

Cookies