Gen 2 EM Motion tracking System VR Demo Kit

The new generation brings improvements in performance and use. The system includes several hardware and firmware updates: • Bootloader. The users will be able to install updates of the system firmware by themselves. Amfitech will be releasing new firmware updates which can be uploaded without having to return the kits for service.

• IMU hardware unit. This new sensor is now included in the receiver sensor hardware. This opens the possibility to implement sensor fusion algorithms for improved motion tracking performance.

• Longer EMF sensor battery life time.

• Easier system start-up calibration procedure.

• Newly designed receiver 3DCoil driver schematic. This new hardware allows real-time compensation of the cross-talk effects on the receiver 3DCoil sensor. Manufacturing tolerance deviation on three-windings sensors will be compensated by this system, improving overall performance.

Future features (under development – planned for implementation during 2020):

• Start-up calibration feature. This improved assembly includes a set of components specially developed so that a start-up calibration procedure by the user is not required. The system will be able to perform self-calibration on start-up.

• Emitter source capacitor bank and multiplexor. The emitter source will have the possibility to be configured from the software console. Setup includes the frequency selection for each axis. Additionally, it will be possible to implement self-selection of frequencies in the firmware, for multiple-emitter configuration scenarios.

• Modulator/Demodulator hardware. This new addition to the circuit will allow low-speed data communication over the B-field transmission

The new kit is already available for purchase on PREMO’s online marketplace, and also through the PREMO Sales Network of representatives and distributors worldwide.A special discount will be applied to Universities and Research Centers.

A complete software package including Amfitrack Viewer Software, .NET dll library for Unity integration and further details can be found here: http://www.amfitrack.com/SW/AmfiTrack_Gen2_Software.zip

– and you can order the Gen-2 kit, already available in our website: https://www.grupopremo.com/713-vr-demo-kit-gen-2

The complete hardware kit includes:

• EMF Source driver: The EMF Source driver is a piece of hardware that drives the EMF Source coil. It is powered by 5V through USB port or by using the 5V USB wall plug-in adaptor supplied with the system. Communication with EMF sensors and USB RF hub is done using 2.4GHz proprietary RF link.

• EMF Source 3D coil: Emits the EM field.

• EMF sensors: The wireless EMF sensors pick up the EM field and calculate their position (6DOF) from the EMF source. Communicating with EMF Source driver and USB RF hub is done using 2.4GHz proprietary RF link. Sensors can be supplied with or without Kalman filter.

• USB RF Hub: The USB RF Hub picks up the 2.4GHz RF link communication between the EMF Source driver and EMF sensors, and relays the system positioning data through its USB port. Please note: The USB RF Hub is only needed to present positioning data from the wireless sensors on a PC. All positioning calculations are done by a microcontroller embedded in the EMF sensors.

• Plug-in 5V USB PSU: The Plug-in 5V USB PSU can be used for powering the EMF Source driver and also for charging the EMF sensors.

• Plug-in 5V USB adaptors: The interchangeable power supply adaptors allows the Plug-in PSU to be used with country specific wall outlets.

Several videos are available where real-time performance of the Generation 2.0 system is shown:

AmfiTrack VR application demo: https://www.youtube.com/watch?v=xRy3sDUQD9w

AmfiTrack 4 pcs Gen2 sensors in mating application: https://www.youtube.com/watch?v=uAZ3ZEZJc3Y&t=1s

About Amfitech:

Amfitech is an engineering consultant company founded in 1999 in Denmark, created by LEGO engineers (the inventors of Mindstorms). Experts on EMF tracking, innovation and product development, they are 14+ engineers with 20 years of experience.

About Premo:

Based in Spain, PREMO is a company engaged in the development, manufacture, and sale of electronic components with a special focus on Power Magnetic Components and the key enabling technologies of the 4th Industrial Revolution: IoT, M2M, VR/AR, Connected and Electric Vehicles.

Our product portfolio includes a wide range of power transformers, inductors and chokes, current sensors, EMC filters, PLC components and RFID antennas (worldwide leader) and AR/ VR Motion Tracking Sensors.

In addition to our broad range of standard components and off-the-shelf products, PREMO also designs custom solutions to fit customer requirements based on the latest technologies to help your systems be more efficient.

An organization of over 1500 employees, 5 design centers, 3 production locations, and an extensive sales network, has let PREMO have a global presence in more than 36 countries to meet our customers specific needs.
Since 1962, we’ve become a preferred supplier because of our strong commitment to business excellence, engineering support, reliable delivery and product quality.