|L (mH) Min||DCR (Ω) Max||Freq. (kHz)||Cres (pF)||Q x,y,z Min||Height (mm)||Width (mm)||Length (mm)||SRF (kHz) Min||Sensitivity (mV/uT) min|
Electromagnetic motion tracking system Works by using one low frequency isotropic magnetic feld generator and one or several isotropic 3D magnetic sensors. 3D coils have huge ﬂexibility in terms of customization and setup to fulfll the application needs or environment changes. This is the smallest 3D coil in the market allowing to be used or very small volumes to be traced.
|Lx,y,z nom||Qx,y,z nom||f (kHz)||SRF x,y (kHz) Min||SRF z (kHz) Min||DCR x (Ω) Max||DCR y (Ω) Max||DCR z (Ω) Max||Sensitivity x,y,z DCR z (Ω) Max(mVpp/App/m) Min|
|3DV06-A-S0100J||1.0 / 1.0 / 5.8 mH||3.4/3/3.5||20||1000||1000||44||49||230||2.7|
|3DV06-A-S0340J||3.40 / 3.40 / 10.2 mH||305/3/4||20||500||750||141||154||350||5|
A wide range of configuration possibilities
PREMO biggest competitive advantage is the short time-to-market performance when developing a custom-made solution according to customer specifics.
A wide variety of EM sensors can be designed to meet AR/VR systems requirements. From cube configurations to low-profile configurations, and from lower to higher sensitivities, the range of possibilities is very wide:
• Shapes (i.e. rectangular, quasi-cub, ultralow-profile)
• Inductance: Tx (20μH – 2mH), Rx(300μH – 7mH)
• Operation frequency (3 – 300kHz)
• Standard cables to male/female connector
• FPC connection
• Over-Molded (low pressure molding)