3DC15-0720J

3DC15-0720J


3DC15 SMD 3D Coil 17.5x16x4 mm - 7.20mH

1203 Items

5,00 €

Frequency (kHz) 125
Cres (pF) 225
Sensitivity x,y,z (mVpp/App/m) Min 95
Height (mm) 3.8
Width (mm) 17.5
Length (mm) 15.5
SRF x,y (kHz) Min 250
DCR z (Ω) Max 170
DCR x,y (Ω) Max 120
SRF z (kHz) Min 600
L x,y,z (mH) 7.20
Q x,y Min 28



If  the three coils from this component are going to be connected to a common GND; pins 1, 7 and 8 should be the chosen ones as common connection in order to keep the electromagnetic characteristics of the part.

Recommended reflow profile.

 

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).

 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance RmaxMeasured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.

 

 

 

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 30.4 24.4 24 20 4 2 4.2 0.3 600

 

All dimensions in mm.

 

Related Products