3DC1515-S-0477J

3DC1515-S-0477J


929 Items

5,00 €

Freq. (kHz) 125
Lx (mH) 4.77
Ly (mH) 4.77
Lz (mH) 6
Qx Min 28
Qy Min 28
SRFx (kHz) Min 300
SRFy (kHz) Min 300
SRFz (kHz) Min 600
DCRx (Ω) Max 100
DCRz (Ω) Max 150
DCRy (Ω) Max 100
Sensitivity x (mV/A/m) Min 85
Sensitivity y (mV/A/m) Min 85
Sensitivity z (mVpp/App/m) Min 85
Cres (pF) 340
Height (mm) 3.8
Length (mm) 15.5
Width (mm) 17.5



If  the three coils from this component are going to be connected to a common GND; pins 1, 7 and 8 should be the chosen ones as common connection in order to keep the electromagnetic characteristics of the part.

Recommended reflow profile.

 

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).

 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance RmaxMeasured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.

 

 

 

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 30.4 24.4 24 20 4 2 4.2 0.3 600

 

All dimensions in mm.

 

Related Products