TR1102 - X/Y axis SMD Ferrite RFID Transponder Inductor 125kHz / 2.38-9mH / 11x2.6x2.2mm

Freq. (kHz)L (mH)Q MinSensitivity (mVpp/App/m) MinHeight (mm)Length (mm)Width (mm)SRF (kHz) MinToleranceCres (pF)DCR (Ω) Max
1259.0024.3752.211.02.6280±5%180108
1257.2027702.211.02.6350±5%22090.2
1254.9130502.211.02.6420±5%33049
1252.3825352.211.02.6500±5%68040.7
1251,0831.5252.211.02.6900± 5%150015.95
Showing 1 - 5 of 5 items
Characteristics

X/Y axis SMD Ferrite RFID Transponder Inductor                

The TR1102 series of surface mountable ferrite wound inductor is the very first SMD coil designed for transponder use. Its length and cross sectional area are optimized to achieve the maximum sensibility in the coil axis. Its size is excellent for plastic moulded inmobilizer transponders. 

The TR1102 is the best solution when both cost and high-speed assembly of the circuit components are sought.

  • Size: 11 x 2.6 x 2.2 mm.
  • Terminals: Ag-Ni-Sn100.
  • Wire: H, 180ºC, Solderable.
  • Max. Operating Temperature +125ºC.


The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales deparment for any inquiry.

 

This product has a datasheet available upon request.

L (mH)ToleranceQ MinFrequency (kHz)Cres (pF)SRF (kHz) MinDCR (Ω) MaxSensitivity (mVpp/App/m) MinLength (mm)Width (mm)Height (mm)
TR1102-0238J   2.38 ±5% 25 125 680 500 40.7 35 11.0 2.6 2.2
TR1102-0491J 4.91 ±5% 30 125 330 420 49 50 11.0 2.6 2.2
TR1102-0720J 7.20 ±5% 27 125 220 350 90.2 70 11.0 2.6 2.2
TR1102-0900J 9.00 ±5% 24.3 125 180 280 152 75 11.0 2.6 2.2
Dimensions

All dimensions in mm.

Packaging

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 30.4 24.4 24 4 4 2 2.5 0.3 5000

 

All dimensions in mm.

SOLDERING

Recommended reflow profile.

 

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).

 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

MEASUREMENT CONDITIONS
  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance Rmax: Measured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.