TP0602 - X/Y axis Micro SMD Hard Ferrite RFID Transponder Coil 125kHz / 2.38-9mH / 6.6x2.3x1.75mm

L (mH) MinDCR (Ω) MaxFreq. (kHz)Cres (pF)Q x,y,z MinHeight (mm)Width (mm)Length (mm)SRF (kHz) MinSensitivity (mV/uT) min
1901251801.752.36.6450
1681252201.752.36.6500
951253301.752.36.6600
491256801.752.36.6900
Showing 1 - 4 of 4 items
Characteristics

X/Y axis Micro SMD Hard Ferrite RFID Transponder Coil

The TP0602 Series of Surface Mountable ferrite wound inductor is a small transponder inductor solution for automotive applications like TPMS,Keyless Go and Keyless entry systems:

 

  • Size: 6.6mm x 2.3mm x 1.75mm.
  • Good mechanical perfomace.
  • High sensitivity for 20KHz, 40KHz and 125KHz applications.
  • Good perfomance in thermal shock test.
  • Good cost/perfomance ratio.
  • Available high inductance version for hearing aids applications.
  • This component is also functional to 20kHz and 134kHz. 

 

Applications:  

Good solution for TPMS moulded solutions. The TP0602 is the smaller SMD transponder coil available in the market.

  • Terminals: Ag-Ni-Sn100.
  • Wire: H, 180ºC, Solderable.
  • Max. Operating Temperature 130ºC.

 

The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz and 20 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales deparment for any inquiry.

 This product has a datasheet available upon request.

       

L (mH)ToleranceQ MinFrequency (kHz)Cres (pF)SRF (kHz) MinDCR (Ω) MaxSensitivity (mVpp/App/m) MinLength (mm)Width (mm)Height (mm)Order online
TP0602-0238J   2.38 ±5% 20.7 125 680 900 49 16 6.6 2.3 1.75
TP0602-0491J 4.91 ±5% 20.7 125 330 600 95 25 6.6 2.3 1.75
TP0602-0720J 7.20 ±5% 18 125 220 500 168 30 6.6 2.3 1.75
TP0602-0900J 9.00 ±5% 18 125 180 450 190 35 6.6 2.3 1.75

Dimensions

 

Packaging

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 30.4 24.4 24 4 4 2 2.5 0.3 5000

 

All dimensions in mm.

 

CAD MODELS
3D 2D
TP0602

To download the file:

1.Put the mouse over the icon

2.Clic on the right button

3.Choose save Link as...

4.Save file

PAD LAYOUT

TP0602 Pad layout

SOLDERING

Recommended reflow profile. 

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).

 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

MEASUREMENT CONDITIONS
  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance Rmax: Measured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.