SDTR1103-0477J

SDTR1103-0477J


This product is out of stock.

5,00 €

Freq. (kHz) 125
Tolerance ±5%
Cres (pF) 340
Height (mm) 2.5
Length (mm) 11.8
Width (mm) 3.6
DCR (Ω) Max 63.8
L (mH) 4.77
Q Min 30
SRF (kHz) Min 350
Sensitivity (mVpp/App/m) Min 60

 

 SDTR1103 Pad layout

Recommended reflow profile.

 

Reflow soldering, vapour-phase soldering. A maximum soldering temperature of 260ºC during 10 s should not be exceed for (see recommended soldering profile with maximum and minimum temperature-time).

 

 

The reflow condition recommended is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used.

  1. Rated Inductance LR: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  2. Q Factor Qmin: Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  3. Self-resonance frequency fmin Measured at frequency fL, with impedance analyser WK3260 with 3MHz installed.
  4. DC resistance RmaxMeasured at 20ºC ambient temperature, measuring current <IR.
  5. Sensitivity: Measured with Helmholtz coils 5 turns, 160mm ∅, + waveform generator Agilent 33120A + oscilloscope Agilent 54622A. Contact PREMO RFID for complete measurement specification.

 

Reel dimensions Tape dimensions PARTS/REEL
A B C D E W  P P0   P1  D  
330 50 13 30.4 24.4 24 8 4 2 2.7 0.3 3000

 

All dimensions in mm.

 

Related Products