HCT-BSR5 - OPEN LOOP HALL EFFECT SENSORS

Download Data-sheet »
Application form »
Current Sensing - Hall-Effect Sensors - HCT-BSR5 - Open Loop Hall Effect Sensors

Features:

Buy
  • Accurate measurements of variety of signal currents: DC, AC, pulsed, mixed.
  • High electrical isolation between primary circuit (high current) and secondary circuit (electronic circuit).
  • Overload capability up to 3 times of the nominal current.
  • Screw assembly and output with Molex connector.
  • Burden resistor inside sensor. Direct output voltage.
  • Open loop solution with good accuracy. 
 

General Data:

  • Operating Temperature: -40 to +85 ºC
  • Storage Temperature: -40 to +125 ºC
  • Weight: 55 g
 

Accuracy:

  • Accuracy at Ip T = 25 ºC: ≤±1 %
  • Linear Error: ≤±0.5 % FS
  • Magnetic Offset voltage: ±12 mV
  • Offset Voltage: 10 mV Max
  • Offset Voltage Drift: <± 0.2 % mV/ºC
  • Rated output drift: ≤±0.4 mV/ºC
  • Response Time: < 3µs
  • di/dt Followed Accurately: > 100A/µs
  • Frequency Bandwidth: DC to 50kHz (-3dB)
 

Application: 

  • General Industrial  applications for current Monitoring
  • Current measure on input stage batteries  inverters
  • UPS Applications (Uniterrumpibles Power Supplies)
  • General using in Switched Power Supplies, for digital control systems