HPC - HIGH POWER PLANAR CHOKES FOR HV APPLICATIONS

Measurement Conditions:

• All test data are referenced to 25°C ambient temperature
• Continuous operating temperature range must be within -40°C/+125°C (ambient + self heating) under worst case conditions; exposure to 180°C peak is allowed. Thermal index H for all raw materials used.
• Performances are subjected to change according to cooling capability of the cold plate where the component is fixed. It is suggested to test the component at system level to verify its temperature after 30 minutes in the final application.
• Inductance values are measured at 10kHz/0.25V Less than +/-10% variation on -40°C/+150°C temperature range
• Dielectric strength between windings and core is above 1kV/50Hz/2sec