TP1103 SMD HARD FERRITE TRANSPONDER INDUCTOR (2.38MH - 9MH)

Características:

This TP1103 Series of Surface Mountable ferrite wound inductor is a stronger solution in the standard dimensions 1103 and compatible with the pad layout of SDTR1103. Performing very good electrical properties and offering a slightly higher sensitivity performance, a very good solution for RTPMS, Keyless Go and Keyless entry systems. Some advantageous characteristics:

• Size: 10.5 x 2.9 x 2 mm.
• Very good mechanical performance.
• Highest sensitivity in this size.
• Very stable electrical properties in full operational
  temperature range (-40, +150ºC)
• Good performance in thermal shock.
• Big metallised pad area Pb free.
• Good cost/perfomance ratio.
• Terminals: Ag-Ni-Sn100.
• Wire: H, 180ºC, Solderable.
• Max. Operating Temperature: 150ºC.

The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales deparment for any inquiry.

This product has a datasheet available upon request.